|
Do it yourself
| |||
| ||||
How to dismantle the car radio and connect an additional wiring to the Renault Fluence
Model: Renault Fluence
MK 1
- Years 2009-2019
On the Renault Fluence, start by protecting the dashboard area and use plastic levers to lift the cover of the upper display on the dashboard. Once freed, disconnect the display connector and set it aside. Using the same levers, release the central frame surrounding the air vents and the air conditioning controls, pulling carefully until the pressure hooks are released. At this point, you can remove the radio body and access the rear connectors. Disconnect the original connectors and connect the additional wiring provided in the kit in series, inserting the new connectors into their respective slots and securing the cables with tape to prevent vibrations. Place the additional module behind the dashboard in the available space, then reinsert the radio, reposition the air conditioning panel, and reattach the central frame with even pressure. Finally, reconnect the upper display and reassemble its cover: the Renault Fluence dashboard is back in order with the new wiring correctly installed.
Posted on 21 November 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Fluence
(2009-2019 /
MK 1)
If the power to the Renault Fluence radio is lost for any reason, a security lock is activated. To remove it, you must enter a four-digit code, usual…
Renault Fluence
(2009-2019 /
MK 1)
In this tutorial we can see how to disassemble the storage compartment in the Renault Fluence, an extremely simple and quick operation. First of all,…
Renault Fluence
(2009-2019 /
MK 1)
If you own a Renault Fluence and want to learn how to properly remove the external rearview mirror, all you have to do is read the following guide ca…
Other guides you may be interested in
|
How to Replace the Battery on a Honda Vision 110
To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.092
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |