Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Fan on the Renault Fluence

Model: Renault Fluence MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

Video tutorial

To replace the cabin fan on the Renault Fluence, open the glove compartment located on the passenger side and loosen the screws inside to completely remove it. Once the glove compartment is removed, you can take off the panels on the left side of the footwell to access the components underneath.

The cabin fan will be located on the left side, which can be pulled out of its housing and disconnected from the connectors.

Connect the new replacement part to these connectors, then reassemble all previously removed parts.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

Renault Fluence (2009-2019 / MK 1) If you have not been able to locate the OBD port inside your 2015 Renault Fluence, do not worry because this guide will explain where it is located a…
Renault Fluence (2009-2019 / MK 1) The fuses in the Renault Fluence are located inside the dedicated fuse boxes installed on the vehicle: in this type of vehicle, you will find two box…
Renault Fluence (2009-2019 / MK 1) In this tutorial, you will learn how to reset the service light on a Renault Fluence, a very simple and quick operation to perform only after complet…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos