|
Do it yourself
| |||
| ||||
Replacement of the steering rack of the Renault Trafic II
Model: Renault Trafic
MK 2
- Years 2001-2014
Let's see how to replace the steering tie rod end of the Renault Trafic II: first of all, we need to lift the front part of the vehicle and remove the front wheels, which will allow us to see the steering tie rod end. Clean the part with a wire brush and WD-40, then make a mark with a marker between the tie rod and the steering tie rod end; pay close attention to the lock nut, as a rotation of the two pieces could change the vehicle's geometry; unlock the supporting nut of the tie rod end and then unscrew the tie rod end, counting the number of turns we are making to remove it: we will need it when reinstalling the new one, which we can find for example on E-Bay with the code 365211135321 at the price of 54.06 euros, with free delivery. Put the tie rod end back in place, making the same number of turns as when removing it, then put the tie rod end back on the pin and tighten the nut to 37 Nm, the lock nut on the other side instead needs to be tightened to 53 Nm. We can put the wheels back on and lower the vehicle.
Posted on 22 November 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Trafic
(2001-2014 /
MK 2)
To reset the AdBlue warning light on the Renault Trafic, first top up the tank by adding the necessary amount of additive liquid into the designated …
Renault Trafic
(2014-2026 /
MK 3)
It will be possible to reset the AdBlue warning light of the Renault Trafic by first performing a top-up with the necessary amount of additional flui…
Renault Trafic
(2014-2026 /
MK 3)
The fuses in the Renault Trafic are located inside the designated fuse box in the vehicle. This is positioned behind the glove compartment on the dri…
Other guides you may be interested in
|
How to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.395
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |