Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the screen frame of the Renault Clio IV radio.

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Car stereo

Let's see in this video how to remove the radio frame of the Renault Clio IV: we don't need any tools, we just have to gently pull towards us starting from the bottom and then also pulling upwards. Be careful because there are two small electrical connectors for the air conditioning that need to be disconnected before removing the frame. If we also want to remove the screen, it is secured with just four screws on the sides, so if we want to replace it, it will be very easy; we just need to disconnect the connectors behind it and change it. Then we will screw the screws back in and put the frame back in place, starting from the top and reconnecting the air conditioning connectors.

Posted on 21 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace a radio on a Clio II with a 2DIN
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, we will see how to replace a standard radio in a Renault Clio III with a 2DIN radio: we will not provide purchasing information, as we…
How to Retrieve the Radio Code for a Renault Clio
How to Retrieve the Radio Code for a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this short and simple guide, you will learn how to retrieve and enter the radio code for the standard radio in a Renault Clio. First, get inside t…
How to Remove the Original Radio from a Renault Clio 4
How to Remove the Original Radio from a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video, learn how to remove and replace the original radio from the fourth series Renault Clio by following these simple steps. First, get ins…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos