Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue refill warning on the Renault Trafic

Model: Renault Trafic MK 3 - Years 2014-2026
Part: AdBlue warning light

The following steps will allow us to reset the AdBlue fluid refill warning on the Renault Trafic; before resetting the warning light, it is necessary to have refilled the AdBlue fluid. So let's get on board the vehicle and start connecting our suitable diagnostic tool for error resetting (to be connected to the OBD socket); then we select the brand and model of the vehicle, go to the error section, and reset the AdBlue warning light, as shown in the video. We then disconnect the tool and start the engine!

Posted on 25 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue top-up warning on the Renault Trafic Van
How to reset the AdBlue top-up warning on the Renault Trafic Van
Renault Trafic (2014-2026 / MK 3) The instructions in this guide will show us how to reset the AdBlue liquid top-up warning of the Renault Trafic Van. Before resetting the AdBlue warn…
How to reset the AdBlue top-up warning on the Renault Trafic
How to reset the AdBlue top-up warning on the Renault Trafic
Renault Trafic (2014-2026 / MK 3) These short and simple steps will show us how to reset the AdBlue liquid top-up warning on the Renault Trafic; to perform this operation, it will be …
How to reset the AdBlue warning light on the Renault Trafic?
How to reset the AdBlue warning light on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) To reset the AdBlue warning light on the Renault Trafic, first top up the tank with the required amount of additive fluid. Once the fluid is added, c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos