Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on a Renault Clio?

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Shocks

See other generations:
Video tutorial

In this tutorial, you will see how to replace the rear shock absorber on a Renault Clio, a straightforward operation that requires good manual skills. First, open the rear hatch, then remove the indicated cover and loosen the upper mounting nut with a 17mm spanner.

Next, lift the vehicle, remove the wheel, and after supporting the suspension arm, undo the lower bolt with an 18mm spanner. At this point, simply fully unscrew the upper nut, insert the replacement shock absorber, and follow the reverse procedure.

Ensure to slightly compress the suspension before securing the lower end.


Posted on 17 February 2026 by ScegliAuto


Related tutorials

How to replace the shock absorbers on the Renault Clio 4?
How to replace the shock absorbers on the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the front shock absorbers on the Renault Clio 4, lift the car so that the corresponding wheel is off the ground. Once the car is lifted, l…
How to Replace the Front Shock Absorbers on the Renault Clio
How to Replace the Front Shock Absorbers on the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today, you will learn how to remove and replace the front shock absorbers on the Renault Clio. First, open the bonnet of the vehicle and start by rem…
How to Remove the Shock Absorber on a Renault Clio
How to Remove the Shock Absorber on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Carefully learn how to remove the shock absorber on a Renault Clio: loosen the wheel nuts, lift the car on a column lift and remove the wheel. Use a …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos