Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Headlight bulb

Today, I will explain how to replace the front headlight bulb on a Renault Clio produced from 2012 to 2021. To replace the bulb, open the bonnet by lifting the release located on the front left of the dashboard. Remove the cover of the interior light if present and disconnect the connector from the bulb by pressing the sides. Remove the metal retaining clip of the bulb and extract it from its housing. Insert the new bulb and reconnect the connector. Close the cover of the interior light and turn on the vehicle lights to test the bulb's operation. The bulb used for the replacement is the H7 model.

Posted on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Renault Clio 2?
How to Replace the Front Headlight Bulb on a Renault Clio 2?
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the front headlight bulb on a Renault Clio, open the bonnet to access the interior of the headlight unit. Here, you will find the cover pr…
How to Replace the Front Headlight Bulb on a Renault Clio 4?
How to Replace the Front Headlight Bulb on a Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the front headlight bulb on a Renault Clio 4, open the bonnet to access the rear of the headlight corresponding to the bulb to be replaced…
How to Replace the Front Headlight Bulb on a Renault Clio
How to Replace the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following instructions will allow you to remove and replace the front headlight bulb on a Renault Clio. First, open the engine bonnet of the vehi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos