Do it yourself
Frequently asked questions about cars and motorcycles

Electrical Problems from Water Under the Seat of a Scenic II

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Checks and maintenance

In this video, we see wet wiring under the driver's seat, where there is stagnant water. This explains the car's electrical problems (ECU, headlights, horn) as the connectors corroded. The reasons for water under the seat may likely stem from the air conditioning drainage, located under the engine bay, which could be blocked, causing water to flow back into the cabin. This situation occurs when turning on the A/C at full power; check if water is coming out from under the vehicle; otherwise, the drain is clogged. If water only enters when it rains, it may be coming from the driver's door seal: try spraying water on the driver's door to see if it enters. Another reason could be the drainage channels under the windscreen, blocked by leaves, allowing water to enter the cabin. If there is a sunroof, that could also be a suspect. Once the culprit is found, remove the seat, dry everything, and ventilate well to avoid mould. Clean the connectors with isopropyl alcohol and spray WD-40 for electrical contacts to prevent corrosion.

Posted on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this brief guide, follow the instructions to remove and replace the driver's seat of the Renault Scenic. First, open the driver's front door and s…
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) If one or more electrical components of your Renault Scenic fourth series (2016-2023) are malfunctioning and you want to directly address the respect…
Renault Scenic (2003-2009 / MK 2, Scenic 2) In this short video, you will see how to remove the rear seats from a 2003 Renault Scenic MK2 J64. First, open the rear doors and move the seats forw…

Other guides you may be interested in

    Frequently Asked Questions

    • Scenic 2009-2015 - What are the problems with the Renault Scenic? Read answer

How to Set the Clock on the Opel Zafira

Setting the clock to the current Italian time on an Opel Zafira model B is a very simple operation, also made easier by our short instructional video. The first step is to turn on the instrument panel and then press the SETTING button located on the central dashboard. Once inside the menu, use the buttons to navigate to the clock setting. Adjust the hours and minutes and restart the instrument panel. If the clock does not update, it may be necessary to diagnose the radio or the vehicle's control unit.

Watch the video!


by ScegliAuto

More videos