Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly and Repair of the Armrest on a Renault Trafic

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Checks and maintenance

In this video, learn how to repair the armrest on a Renault Trafic, which does not lock in position and falls forward. There are indeed locking hooks and adjustment mechanisms that are broken. For the repair, you will need a cross screwdriver, a drill with a 2.5mm bit, a self-tapping wood screw of the same diameter, plastic glue, and foam. Start by disassembling the armrest by removing the fabric cover, which is glued and requires some delicacy. Unscrew the 4 side screws and the central one. This way, you will see that the locking hooks are broken, as they usually break at the base, and the lever that adjusts the tilt is fragile. You will need to create a manual stop, marking the desired 90° position; drill the plastic with the drill, and screw in the self-tapping screw to create the new "stop". Apply plastic glue to the cracks before assembling, then fill the void with foam to restore rigidity, and then reposition the fabric cover. To avoid future damage, it is advisable not to force too much on the armrest and periodically lubricate the mechanisms with silicone spray.

Posted on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Trafic (2001-2014 / MK 2) In this short guide, we will see the instructions that will allow us to disassemble and replace the armrest of the Renault Trafic, but also of the Op…
Renault Trafic (2001-2014 / MK 2) Before you begin, open the side door of your Renault Trafic. Start by unfastening the lower side hooks that secure the rear seats to the floor. Then,…
Renault Trafic (2001-2014 / MK 2) Do you want to remove the roof lining panel of a Renault Trafic? Let’s see how to remove the covering panel. Remove the side handles of the lining wi…

    Frequently Asked Questions

    • Trafic 2014-2027 - Where is the inertia switch located in the Renault Trafic van? Read answer
    • Trafic 2014-2027 - Why does the Start and Stop of a Renault Trafic not work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos