|
Do it yourself
| |||
| ||||
How to Solve the Cooling Fan Noise Issue on Renault Espace IV
Model: Renault Espace
MK 4
- Years 2002-2014
Learn how to resolve the screeching noise, especially when the engine is cold, on a Renault Espace IV: the fan motor has axial play, indicating wear in the bearing or the internal bushing of the electric motor. What we see in the video is not a permanent repair, but a workaround to reduce the noise for a while: the idea is to inject thick grease into the motor to lubricate the worn bushing. The fan motor has an adhesive tab, and by removing it, we find a small factory hole through which we can push a generous amount of thick grease into the motor, in the area of the bushing, using the nozzle of the tube. While injecting, it is helpful to manually spin the fan impeller to help the grease penetrate and distribute evenly. Once filled, seal the hole well with strong adhesive tape to prevent dust and dirt from entering. The noise disappears or is drastically reduced, but the mechanical play remains. It is a temporary solution; the wear is physical, and sooner or later the noise will return, and in extreme cases, the fan motor may seize, so it is advisable to plan for the replacement of the fan to resolve the issue at its root.
Posted on 17 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Espace
(2002-2014 /
MK 4)
The cabin fan is located at the bottom of the frame of your Renault Espace. Before you can start, lift the vehicle to access the fan cover. Begin by …
Renault Espace
(2002-2014 /
MK 4)
Before you can start, you need to lift your Renault Espace, as the heating fan is located underneath the vehicle. Begin by unscrewing and removing th…
Renault Espace
(2002-2014 /
MK 4)
Today we will see the instructions that will allow us to disassemble and replace the cabin fan of the Renault Espace, in simple steps. To access the …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.204
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |