Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the knob on a Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Shift knob

Do you want to replace the knob on your Renault Clio? Let's see in this video how to proceed. To begin with, disconnect the frame of the leather cap with a plastic lever; take the knob in your hands and rotate it to the left and right until it is removed from the shift rod. To carry out the assembly: mount the new leather cap with the clips (block the frame on the central tunnel), then take the new knob and insert it into the rod on the central tunnel until it is tightened in the rod. Finally, we test the correct assembly of the knob with the movement of the rod on the central tunnel.

Posted on 28 December 2019 by ScegliAuto

Video tutorial

Related tutorials

How to remove the gear knob of a Renault Clio
How to remove the gear knob of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before starting, we will have to sit in the driver's seat of our Renault Clio. Let's start then by going to disengage and lift the lower section of t…
How to replace the gear knob of the Renault Clio
How to replace the gear knob of the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) If the gear knob in your Renault Clio is excessively worn and you want to replace it with a new one, simply read the following guide carefully and fo…
How to disassemble the gear knob of a Renault Clio?
How to disassemble the gear knob of a Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To remove the gear knob of your Renault Clio, simply grab it firmly and pull upwards with some force. Make sure to exert a uniform and steady pressur…

How to Remove the Instrument Cluster on a Nissan Qashqai

How to remove the instrument cluster on a Nissan Qashqai? Follow these steps: use a lever to remove the trim plastics under the steering wheel and take out the air vent next to the instrument cluster. Unscrew the securing screws of the instrument cluster with a screwdriver; after removing the plastics, pull out the ignition button (right side) from the dashboard and detach the plastics in the centre of the cluster. Unscrew the securing screws around the instrument cluster and remove it along with the power cable located at the back of the cluster. Install a new part or replace the LEDs/bulbs in the cluster and reassemble it.

Watch the video!


by ScegliAuto

More videos