Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Sliding Door Handle on the Renault Trafic

Model: Renault Trafic MK 3 - Years 2014-2026
Part: Car door

Let's see how to replace the sliding door handle on a Renault Trafic: first, you need to remove the inner door panel to access the internal mechanisms. This involves removing the handle, unscrewing the hidden screws, and detaching the panel from the door structure. Once the panel is removed, you will have access to the back of the mechanism. Disconnect all electrical connectors and mechanical control cables. The lock is secured to the door skin with rivets, which must be removed with a drill of the appropriate diameter to break their heads. Be very careful when handling plastic parts, as they can break easily. Before installing the new piece, connect all the connectors and cables to the new lock. It is much easier to do this now that the piece is not secured. Insert the new lock through the door hole and secure it with new rivets. Now reassemble the door panel, but not before testing the operation.

Posted on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Trafic (2001-2014 / MK 2) In this short guide, we will see the instructions that will allow us to disassemble and replace the front door handle of the Renault Trafic. First, l…
Renault Trafic (2001-2014 / MK 2) The removal of the rear door handle of the Renault Trafic is a fairly simple operation to perform independently. We open the rear door and unscrew th…
Renault Trafic (2014-2026 / MK 3) Today we will explain how to remove the front door panel of the Renault Trafic. To carry out this simple operation, we need to open the door in quest…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos