|
Do it yourself
| |||
| ||||
How to Remove the Display from Renault Clio Second Series
Model: Renault Clio
Clio 2, MK 2
- Years 1998-2005
As the video shows, start by removing the rubber trims on the driver's and passenger's sides. Once done, work on the pillars that are secured with clips; do this gently. Next, locate the screws on the dashboard and begin unscrewing them. After unscrewing, access the glove compartment, detach the plastic cover, and remove the screws. Then, work on the other trims and disconnect them as well. You will also need to remove the screws from the front windscreen air vent. Then, work on the screws at the base of the steering column to remove the covers that conceal the steering column and access the other screws, as shown in the video. Finally, the dashboard is removed. Now it will be easy to access the display and make the necessary replacements for both the central display and the speedometer.
Updated on 10 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
In this guide, learn how to disassemble and replace the standard car radio with a 2-Din unit in the Renault Clio, following the instructions below. F…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
In this video, learn how to remove the plastic cover of the central display located at the top of the Renault Clio third series. First, get inside th…
Renault Clio
(1998-2005 /
Clio 2, MK 2)
The window regulator fuse of our second series Renault Clio is located inside the fuse box. The fuse box is situated in the engine compartment, in th…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.231
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |