Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Pollen Filter on the Renault Megane III

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

The pollen filter on the Renault Megane III is located under the glove compartment on the passenger side (left-hand drive) and is protected by a plastic cover. Remove the protective panel located under the dashboard, which is secured with a clip or a Torx screw.

The cover is a black plastic piece located on the side of the centre console. The cover can be released by hand or with a flat-head screwdriver.

Remove the old filter, thoroughly clean the compartment, which will be dirty with dust and debris (leaves, insects, etc.), and place the new filter in position, ensuring the arrows point inward. Refit the cover and the panel, and you're done.


Posted on 14 May 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on the Renault Megane III
How to Replace the Pollen Filter on the Renault Megane III
Renault Megane (2008-2015 / Megane III, Megane 3) .. In this video, you will learn how to change the pollen filter on the Renault Megane III: first, remove the upper part of the glove.. …
How to Change the Cabin Filter on the Renault Megane II
How to Change the Cabin Filter on the Renault Megane II
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, learn how to change the cabin air filter on the Renault Megane III: to change this filter, you need to remove part of the dashboard, s…
How to change the cabin air filter on a Renault Megane III
How to change the cabin air filter on a Renault Megane III
Renault Megane (2008-2015 / Megane III, Megane 3) To change the cabin air filter on a Renault Megane III, access it from the passenger footwell. As seen in the video, there is a black plastic triangl…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos