Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil and filter on the Renault Clio 5

Model: Renault Clio Clio V, Clio 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

See other generations:
Video tutorial

To facilitate the operations of replacing the engine oil and its filter on the Renault Clio 5, you can lift the car on axle stands to gain easier access to the underside of the vehicle. This is particularly useful because to carry out this maintenance task, it is first necessary to remove the engine protection panel.

Only after doing this can you finally drain the oil sump and remove the filter. While the used oil drains into the collection container, you can change the cartridge and the filter gasket, then remount it in place, close the oil sump, and reinstall the protection panel.

Finish by adding the new engine oil.


Posted on 18 May 2026 by ScegliAuto


Related tutorials

How to Change Engine Oil and Filter on a Renault Clio III
How to Change Engine Oil and Filter on a Renault Clio III
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Let's see how to change the engine oil and oil filter on a Renault Clio III: open the bonnet and remove the cap from the engine cover; this will help…
How to Change the Engine Oil and Filter in a Renault Clio
How to Change the Engine Oil and Filter in a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the engine oil and filter on a third-generation Renault Clio, slightly warm up the engine and then switch it off. Park the vehicle on a fl…
How to Change the Engine Oil and Filter on a Renault Clio
How to Change the Engine Oil and Filter on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) To replace the engine oil and filter on a Renault Clio 5, start the engine for a few minutes to slightly warm the oil, then turn off the vehicle and …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos