Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a Renault Clio

Model: Renault Clio Clio V, Clio 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

See other generations:
Video tutorial

To replace the engine oil and filter on a Renault Clio 5, start the engine for a few minutes to slightly warm the oil, then turn off the vehicle and safely lift it. Position a container under the oil sump and unscrew the drain plug to allow the old lubricant to fully drain.

Once the draining is complete, locate the oil filter and remove it with an appropriate spanner, being careful of any residual oil. Before installing the new filter, apply a thin layer of clean oil to the seal and screw it on without over-tightening.

Re-screw the sump plug, lower the vehicle, and pour the new oil through the upper filler neck, respecting the quantity specified for the installed engine. Then start the engine for a few seconds, check for any leaks, and verify the oil level, topping up if necessary.


Posted on 19 May 2026 by ScegliAuto


Related tutorials

How to Change Engine Oil and Filter on a Renault Clio III
How to Change Engine Oil and Filter on a Renault Clio III
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Let's see how to change the engine oil and oil filter on a Renault Clio III: open the bonnet and remove the cap from the engine cover; this will help…
How to Change the Engine Oil and Filter in a Renault Clio
How to Change the Engine Oil and Filter in a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the engine oil and filter on a third-generation Renault Clio, slightly warm up the engine and then switch it off. Park the vehicle on a fl…
How to replace the engine oil and oil filter of the Renault Clio 4
How to replace the engine oil and oil filter of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The following video tutorial shows us how to independently perform an oil and oil filter change on a Renault Clio model 4. To perform the oil change,…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos