Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Barrel on the Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013

Today's instructions will show you how to remove and replace the ignition barrel on the Renault Clio in simple steps. First, get inside the cabin and start by removing the plastic cover located behind the steering wheel. Next, remove the screw and the fixing pin of the barrel, as shown in the video. At this point, disconnect the two electrical connectors and remove the ignition barrel. Proceed with the repair or replacement of the component, also replacing the ignition key as necessary. Finally, check its operation.

Posted on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the ignition switch of the Renault Clio.
How to disassemble the ignition switch of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today we will explain how to remove the non-functioning ignition switch of the 2006 Renault Clio. We will start by removing the upper cover of the st…
Removing the Ignition Barrel from a Renault Clio
Removing the Ignition Barrel from a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide will show you the steps to remove and replace the ignition barrel of a Renault Clio. First, get inside the vehicle and start by removing t…
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Before you begin, sit in the driver's seat of your Renault Clio. Start by turning on the ignition by turning the key in the ignition barrel. Next, wa…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2005-2013 - Why doesn't the Renault Clio 3 turn on? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos