Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter in the Renault Clio 1.2 TCe

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Engine oil

Today's instructions will allow you to carry out the routine maintenance service by replacing the engine oil and oil filter in the Renault Clio 1.2 TCe. First, raise the vehicle and start removing the lower plastic engine cover, then unscrew the oil drain bolt found on the sump; let the oil drain into a container for about ten minutes, as shown in the video. At this point, use the appropriate tool to unscrew the oil filter cartridge, replacing it with the new one (screwing it in gently); finally, top up with the new engine oil!

Posted on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter on Renault Clio 1.5 dCi
How to Replace the Engine Oil and Oil Filter on Renault Clio 1.5 dCi
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today you will learn the procedure for performing routine maintenance by replacing the engine oil and oil filter on the Renault Clio 1.5 dCi. First, …
How to Replace the Engine Oil and Oil Filter on a Renault Clio
How to Replace the Engine Oil and Oil Filter on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the engine oil and oil filter on a Renault Clio, lift the car using axle stands. This will allow access to the underside of the vehicle to…
How to replace the engine oil and oil filter of the Renault Clio 4
How to replace the engine oil and oil filter of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The following video tutorial shows us how to independently perform an oil and oil filter change on a Renault Clio model 4. To perform the oil change,…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos