Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Daytime Running LED Bulb in the Front Headlamp of a Renault Megane

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Headlight bulb

In this guide, we will discover the instructions that will allow you to repair or replace the daytime running LED bulb in the front headlamp of a Renault Megane. First, open the bonnet of the vehicle and begin to dismantle and remove the front headlamp by unscrewing the fastening screws and disconnecting the electrical connector of the bulbs; then remove the internal plastic cover of the headlamp, taking out the LED light module, as shown in the video. At this point, replace and install the new daytime running LED module, following the video tutorial to the end!

Posted on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Daytime Running Light Bulb on a Renault Megane
How to Replace the Daytime Running Light Bulb on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) If you need to replace the front daytime running lights on this vehicle, you will find the instructions in the video and the description below. First…
How to Change the Front Headlamp Bulb on a Renault Megane
How to Change the Front Headlamp Bulb on a Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Discover in this guide how to remove and replace the front headlamp bulb on a Renault Megane by following these simple and quick steps. First, open t…
How to automatically set the daytime running lights on the Renault Scenic III
How to automatically set the daytime running lights on the Renault Scenic III
Renault Megane (2008-2015 / Megane III, Megane 3) We can see in this video how to activate the daytime running lights setting on a Renault Megane II: we see that on the top of the lever on the right …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos