Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable Start & Stop in the Renault Captur?

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, see how to disable Start & Stop in the Renault Captur, a very simple and quick operation, to be done if you find it too intrusive. First, go inside the cabin, then insert the key and start the vehicle.

Next, locate the button depicting a circled "A" on the lower left switch panel of the dashboard, press it and check that the corresponding indication has appeared on the display. The system's deactivation is not permanent; it must be repeated at each vehicle start.


Posted on 27 August 2026 by ScegliAuto


Related tutorials

How to Disable the Start&Stop System on the Renault Captur - Clio
How to Disable the Start&Stop System on the Renault Captur - Clio
Renault Captur (2013-2019 / MK 1) In this brief and simple guide, we will see the instructions to enable or disable the start&stop system on the Renault Captur, as well as the Clio. F…
How to Permanently Disable the Start&Stop System on a Renault Captur?
How to Permanently Disable the Start&Stop System on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To permanently disable the Start&Stop system on a Renault Captur, press the designated button located on the dashboard to the left of the steering wh…
How do you deactivate the Start&Stop of the Renault Captur?
How do you deactivate the Start&Stop of the Renault Captur?
Renault Captur (2019-2026 / MK 2) In order to deactivate the Start&Stop system of the Renault Captur, you need to insert the ignition key into the slot, so that you can turn it to sta…

    Frequently Asked Questions

    • Captur 2013-2019 - What to do if the Renault Captur speedometer does not work? Read answer
    • Captur 2019-2026 - What to do if the parking sensors in a Renault Captur do not work? Read answer
    • Captur 2019-2026 - Why is the rear view camera of the Renault Captur not working? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos