Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Captur
  6. : How to deactivate the start&stop of the Renault Captur - Clio

Renault Captur - Video tutorial

Model: Renault Captur MK 1 - Years 2013-2019
Part: Checks and maintenance
Operation: How to deactivate the start&stop of the Renault Captur - Clio

In this short and simple guide we will see the instructions that will allow us to activate or deactivate the start&stop system of the Renault Captur, but also of the Clio. First we get on board the car and start the engine by inserting the electronic key; then we go to press the start & stop button to deactivate it (the light will appear on to indicate that the start & stop system is deactivated), as shown in the video. On the other hand, when the start&stop is active, we will see the green light appear on the instrument panel; it comes on when the car stops in traffic or at traffic lights.


Posted on 1 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Captur 2019-2025 - Why isn't the central display of the Renault Captur working? Read Answer
    • Captur 2013-2019 - How do you turn off the service light on the Renault Captur? Read Answer
    • Captur 2013-2019 - Has the Renault Captur 1.5 dci shown probable problems? Read Answer
    • Captur 2019-2025 - How much does it cost to install the rear camera of a Renault Captur? Read Answer
    • Captur 2013-2019 - Why isn't the start & stop of the Renault Captur working anymore? Read Answer
    • Captur 2019-2025 - What is the problem with the 2022 Renault Captur? Read Answer
    • Captur 2019-2025 - What does the warning light with an exclamation mark on the Renault Captur indicate? Read Answer
    • Captur 2013-2019 - How do you turn off the service light in the Renault Captur? Read Answer
    • Captur 2013-2019 - What is the meaning of the "Check Injection" warning light in the Renault Captur? Read Answer
    • Captur 2013-2019 - Why is the fuel tank cap of the Renault Captur locked? Read Answer
    • Captur 2013-2019 - Why does the ESC light turn on in the Renault Captur and the engine does not start? Read Answer
    • Captur 2013-2019 - What does the Eco function mean in the Renault Captur? Read Answer
    • Captur 2013-2019 - Why is the Renault Captur not starting? Read Answer
    • Captur 2013-2019 - How do you reset the service light on the Renault Captur? Read Answer
    • Captur 2013-2019 - Why doesn't the fuel tank flap of the Renault Captur open? Read Answer
    • Captur 2019-2025 - Why is the touch screen of the Renault Captur not working? Read Answer
    • Captur 2013-2019 - Where is the fuse box located in the Renault Captur? Read Answer
    • Captur 2013-2019 - What problem affected the brakes of the Renault Captur? Read Answer
    • Captur 2013-2019 - What are the causes of the Renault Captur clock problem? Read Answer
    • Captur 2013-2019 - Why does the fuel filler flap on my Renault Captur stay stuck? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos