Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fan Resistor on Renault Master

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Blower motor

See other generations:
Video tutorial

Where is the fan resistor located on a Renault Master? In this video, we will see how to remove the part. Use a lever to remove the plastic under the glove compartment, then unscrew the cover of the fan (where the resistor is located) with a screwdriver.

Disconnect the resistor connector, then pull it out from the cabin. Insert a new resistor next to the fan (connect the power connector).

Refit the cover and tighten the screws. Check the correct installation of the fan and its proper functioning.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Disassembly of the cabin fan of the Renault Master.
Disassembly of the cabin fan of the Renault Master.
Renault Master (2010-2023 / MK 3) Today we will see the main instructions on how to disassemble and replace the cabin fan of the Renault Master. First, let's get inside the cabin and …
How do you replace the cabin fan of the Renault Master?
How do you replace the cabin fan of the Renault Master?
Renault Master (2010-2023 / MK 3) In order to completely remove the cabin fan of the Renault Master, it will be necessary to completely dismantle the dashboard: starting by removing t…
How do you replace the cabin fan of the Renault Master?
How do you replace the cabin fan of the Renault Master?
Renault Master (2010-2023 / MK 3) In order to replace the cabin fan of the Renault Master, it is necessary to completely dismantle the dashboard, so that it is possible to access the …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos