Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the cabin fan of the Renault Master.

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Blower motor

See other generations:
Video tutorial

Today we will see the main instructions on how to disassemble and replace the cabin fan of the Renault Master. First, let's get inside the cabin and start removing all the dashboard components by unscrewing the fastening screws and disconnecting the various electrical connectors; then we will unscrew the screws of the dashboard, thus gaining access to the cabin fan located at the top, as shown in the video.

At this point, we will unscrew the screws of the fan and disconnect the power wiring to remove it, either repairing it or replacing it with a new one.


Posted on 8 December 2025 by ScegliAuto


Related tutorials

How do you replace the cabin fan of the Renault Master?
How do you replace the cabin fan of the Renault Master?
Renault Master (2010-2023 / MK 3) In order to replace the cabin fan of the Renault Master, it is necessary to completely dismantle the dashboard, so that it is possible to access the …
Replacing the Fan Resistor on Renault Master
Replacing the Fan Resistor on Renault Master
Renault Master (2010-2023 / MK 3) Where is the fan resistor located on a Renault Master? In this video, we will see how to remove the part. Use a lever to remove the plastic under the…
How do you replace the cabin fan of the Renault Master?
How do you replace the cabin fan of the Renault Master?
Renault Master (2010-2023 / MK 3) In order to completely remove the cabin fan of the Renault Master, it will be necessary to completely dismantle the dashboard: starting by removing t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos