Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Renault Megane air filter

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Air filter

The air filter must be changed at each service, let's see how it is changed on the Renault Megane. Pull up the engine compartment opening lever located at the bottom left of the dashboard and lift the front hood up, secure the same with the rod. Unscrew the screws that tighten the plastic of the filter box, open the air kit (unscrew the tightening screws), uncover the cap of the filter box and extract the worn air filter. We insert a new filter in the air box (making it adhere well around the walls). We close the air box with the plastic coating and tighten the screws.


Posted on 2 December 2023 by ScegliAuto



How to replace the engine air filter of the Renault Megane 3
Renault Megane (2008-2015 / Megane 3, Megane III) If the engine of your Renault Megane Mk3 often overheats even at low speeds, it is very likely that it is time to replace the air filter. In this new
How to replace the air filter in the Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) To replace the air filter on a Renault Megane vehicle, we first need to open the front hood and then proceed with removing the air tube, unhooking th
How to replace the air filter of the Renault Megane 4.
Renault Megane (2015-2023 / Megane IV, Megane 4) If the engine of your Renault Megane Mk4 overheats abnormally due to the air filter being too old, then you must replace it as soon as possible. Belo

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos