Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Timing Belt on Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Timing belt

Replacing the timing belt on a Renault Megane, here’s how to do it. Lift the car on a column lift, remove the front wheel and the right wheel arch liner. Once these operations are completed, remove the timing belt cover panel (remove the sensor). Using a spanner, loosen the second tensioner and slide the belt off its seat. After fitting the new belt, use a fixed spanner to install the tensioner roller, tension it until the correct belt tension is achieved (fit both belts). Finally, check the tensioner and the belt itself, tighten everything with a socket wrench. Close the bonnet and test the vehicle.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2002-2010 / Megane 2) In this guide, we will discover how to dismantle and replace the timing belt and water pump on the Renault Megane 1.5 dCi. First, lift the vehicle an…
Renault Megane (2002-2010 / Megane 2) In this guide, we will go through the main steps to change the timing belt on a Renault Megane second series with a 1.5 DCI engine. First, lift the v…
Renault Megane (2015-2023 / Megane 4, Megane IV) The timing belt on your Renault Megane with a 1.5 dCi engine should be replaced every 6 years or 160,000 miles. This varies significantly based on ve…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - What is the cost of replacing the toothed belt on the Renault Megane? Read answer
    • Megane 2015-2023 - When should the timing belt be changed in a Renault Megane? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos