Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Roof Rack on Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Roof rack bars

See other generations:
Video tutorial

To fit a roof rack on a Renault Captur, first ensure the vehicle is on a ramp or flat surface, securely immobilised. Next, adjust the distance of the feet of the roof rack on the bars (the measurements for these distances can be seen in the video images) that need to be fixed to the roof of the Captur.

At this point, fit the bars onto the vehicle. There are preset positions, and at these positions, secure the feet of the bar. First, insert the foot into the designated groove, then secure it to the side with the appropriate screws.

Tighten the side bolt and repeat the process on the other side. Perform the same operations for the other bar, and you're done!


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Reset the Trip Meter on a Renault Captur
How to Reset the Trip Meter on a Renault Captur
Renault Captur (2019-2026 / MK 2) Before you begin, sit in the driver's seat of your Renault Captur. Start by repeatedly pressing the selection button on the right side of the steerin…
How to Fold Down the Rear Seats of a Renault Captur
How to Fold Down the Rear Seats of a Renault Captur
Renault Captur (2019-2026 / MK 2) Before you can begin, open the rear hatch of the boot of your Renault Captur using the button on the electronic key. Start by pushing the front seats…
Where is the EOBD port located on the 2018 Renault Captur?
Where is the EOBD port located on the 2018 Renault Captur?
Renault Captur (2013-2019 / MK 1) Owners of Renault Captur cars may have wondered where the EOBD port of their vehicle is located. Fortunately, this is very easy to locate and can als…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos