Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Front Headlight Bulb on Renault Clio 3

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Headlight bulb

In this video, we will see how to remove the front headlight bulbs on the Renault Clio third series. First, open the bonnet from the inside and secure the prop rod: in this type of vehicle, you won't need to remove anything as you already have free access to the bulb, although it is a bit tight. Next, remove the plastic protective cover of the bulbs and disconnect the connector: at this point, release the tab and pull out the bulb. It is recommended to use high-quality bulbs: in this case, we have removed the dipped beam H7.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Renault Clio
How to Replace the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following instructions will allow you to remove and replace the front headlight bulb on a Renault Clio. First, open the engine bonnet of the vehi…
Removing the Front Headlight of the Clio
Removing the Front Headlight of the Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Do you want to remove the front headlight of a Renault Clio? Let's see how to disassemble the front headlight. Before removing the front headlight, y…
How to Replace the Front Bulb on the Renault Clio
How to Replace the Front Bulb on the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, you will see how to extract and replace the front headlamp bulb on the fourth series Renault Clio. Specifically, you will deal with the dipped…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos