Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing EGR Valve from Renault Espace

Model: Renault Espace MK 3 - Years 1996-2002
Part: EGR valve

In this guide, you will learn how to replace the EGR valve on a Renault Espace. First, open the bonnet of your car and disconnect the battery terminals (positive and negative). Now, use a Torx spanner to unscrew the screws located at the back of the valve: next, detach and unscrew the two screws securing the valve to the exhaust manifold. Use a flexible magnet if needed to retrieve any parts that fall. Remove the metal gasket from your exhaust manifold pipe and take out your EGR valve!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located in the Renault Espace 2010?
Where is the OBD port located in the Renault Espace 2010?
Renault Espace (2002-2014 / MK 4) Locating the OBD port of your 2010 Renault Espace is really simple and you just need to follow the steps described in this new mini guide aimed at yo…
Where is the OBD port of the Renault Espace 5 located?
Where is the OBD port of the Renault Espace 5 located?
Renault Espace (2015-2022 / MK 5) In the following guide aimed at all of you who own a fifth series Renault Espace, we will help you find the OBD port quickly and safely. First of all…
How do you reset the Service light on the Renault Espace?
How do you reset the Service light on the Renault Espace?
Renault Espace (2015-2022 / MK 5) In order to reset the Service light that appears on the instrument panel of the Renault Espace, you will need to insert the ignition key into the cor…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos