Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Fog Light Bulbs on Renault Grand Scenic 2

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fog lights

See other generations:
Video tutorial

In this video, you will learn how to replace the fog light bulbs on the Renault Grand Scenic 2. First, lift the car and use a screwdriver to disconnect the connector of the fog light by pressing the tab (be careful not to break it). Now, unscrew the screws to remove the entire unit where the bulb is housed.

The video will also show how to change the bulb holder.

If desired, you can simply replace the bulb by fitting the appropriate seal. Reassemble everything, reconnect the connector, and check the operation!


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on the Renault Grand Scenic?
How to Replace the Rear Light Bulbs on the Renault Grand Scenic?
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) In this tutorial, see how to replace the rear light bulbs on the Renault Grand Scenic, a very simple and quick operation. First, ensure the dashboard…
How to replace the tail light bulbs in the Renault Grand Scenic?
How to replace the tail light bulbs in the Renault Grand Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this tutorial, we will see how to replace the rear light bulbs on the Renault Grand Scenic, a very simple and quick operation. First of all, let's…
Replacement of the rear taillight bulbs of the Renault Scenic
Replacement of the rear taillight bulbs of the Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) These short and simple instructions will show us the process of disassembling and replacing the bulbs of the rear light of the Renault Scenic. First …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos