Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bumper on Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Front bumper

Remove the front bumper if damaged from the front of a Renault Clio. Lift the bonnet and secure it. Use a socket spanner to undo the fastening screws located at the front of the bumper (if present). Once the screws are removed, lift the car with a jack and undo the screws located in the wheel arch liners. Remove the bumper from the body of the vehicle. Once the old bumper is removed, position the new bumper by hand. Tighten the fastening screws of the front bumper on the Clio. Reconnect any previously disconnected connectors. Don't forget the fastening screws.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Bumper on the Clio
Replacing the Front Bumper on the Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Let's look at replacing the front bumper on the Clio. Lift the bonnet and secure it, then raise the vehicle on a jack to remove the screws at the bot…
How to Remove the Front Bumper on a Renault Clio
How to Remove the Front Bumper on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet …
Removing Front Bumper on a Clio
Removing Front Bumper on a Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Remove the front bumper on a Clio. Lift the bonnet and secure it. Unscrew the fastening screws located at the top of the bumper. Once the screws at t…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos