Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Diesel fuel filter

See other generations:
Video tutorial

To replace the diesel filter on a Renault Clio, remove the filter as indicated in the guide. Remove the right wheel, then take off the plastic cover at the bottom of the bumper (splash guard) to access the diesel filter located in the bumper (as shown in the video).

After removing the container, disconnect the circulation pipes and take out the diesel filter. Install the new diesel filter inside the container, reattach the plastic cover under the car's bumper, and tighten the screws.

Refit the front wheel with the corresponding securing bolts. Lower the car and start the engine.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on the Renault Clio 4 1.5 DCI
How to Replace the Diesel Filter on the Renault Clio 4 1.5 DCI
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video tutorial, we will see how to dismantle and replace the diesel filter on the fourth series Renault Clio, in simple and quick steps. Firs…
Renault Clio Diesel Filter Removal
Renault Clio Diesel Filter Removal
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To remove the diesel filter on a Renault Clio, take out the diesel filter located in the front bumper. Remove the right wheel, then take off the plas…
How to Replace the Fuel Filter on the Renault Clio 2 1.2 Petrol
How to Replace the Fuel Filter on the Renault Clio 2 1.2 Petrol
Renault Clio (1998-2005 / MK 2, Clio 2) Let’s discover the steps to remove and replace the fuel filter on the second series Renault Clio, following the instructions below. First, lift the v…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos