Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Door trim panel

To remove the door panel on a Renault Twingo, unscrew the screws located in the area of the upper door opening lever, then remove the plastic cover behind the external rear-view mirror (internal plastic). Unscrew the screws in the internal handle, unscrew any remaining screws on the door panel, and detach the retaining clips. Pull the panel away with your hands and unclip it from the door (disconnect the wiring harness and the opening cable). Replace the damaged panel with a new one.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Renault Twingo
How to Remove the Door Panel on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) To remove the door panel (front right) of a Renault Twingo: disconnect the battery terminals located in the engine compartment. Using a screwdriver, …
How to disassemble the cabin fan of the Renault Twingo
How to disassemble the cabin fan of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Below we will see the instructions that will allow us to disassemble and replace the cabin fan of the Renault Twingo. First of all, we get on board t…
Removing the Front Door Panel of the Renault Twingo
Removing the Front Door Panel of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) The steps to remove the front door panel of the Renault Twingo are quite simple. First, open the front door and start by removing the plastic cover o…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos