Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Climate Fuse on a Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Fuse box

See other generations:
Video tutorial

Replacing the fuse on a Renault Clio? Let's see where to find the car fuses for replacement. Open the cover and check for any faults indicated on the instrument cluster.

Use a plastic lever to remove the trim on the side of the dashboard, and use needle-nose pliers to pull out the damaged fuses located in the compartment. Once this is done, insert the new fuses into the appropriate slots in the compartment.

Test the car's operation by turning on the instrument cluster. Close the fuse box with the plastic cover.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide explains the procedure for removing and replacing the climate control buttons of the Renault Clio. First, get inside the vehicle and start…
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To perform this operation, you will first need to remove the stereo unit using the appropriate extraction tools. This will allow you to remove the pr…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The front wiper fuse for the Renault Clio model IV is located inside the fuse box in the cabin, specifically under the steering wheel. To access the …

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What is the location of the wiper fuse on the Renault Clio? Read answer
    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos