Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob on Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Shift knob

See other generations:
Video tutorial

How to remove the gear knob on the Megane? Here’s how to replace the knob on the central tunnel. Detach the gaiter from under the knob, take the knob in your hands and rotate it left and right until you remove it from the gear stick.

Use a plastic lever to detach the leather gaiter frame (if it needs replacing). Fit the new leather gaiter with the clips (if previously removed), then take the new knob and slide it onto the stick on the central tunnel, tightening the new knob until it is fully seated.

Finally, test the new knob on the central tunnel.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob and Gaiter on the Renault Megane 3
How to Remove the Gear Knob and Gaiter on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) In this video tutorial, you will see how to remove and replace the gear knob and gaiter on the Renault Megane third series, in RS version. First, get…
How to Replace the Gear Knob on the Renault Megane
How to Replace the Gear Knob on the Renault Megane
Renault Megane (1995-2003 / Megane 1) Removing and replacing the gear knob on the Renault Megane is a very simple operation. First, get inside the vehicle and pull the gear knob upwards w…
How to Remove the Gear Knob on a Renault Clio 3
How to Remove the Gear Knob on a Renault Clio 3
Renault Megane (2008-2015 / Megane III, Megane 3) How do you remove the gear knob from your Renault Megane? Let's look at removing the piece and replacing it. Grasp the knob in your hands and twist i…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos