Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob and Gaiter on the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Shifter boot

In this video tutorial, you will see how to remove and replace the gear knob and gaiter on the Renault Megane third series, in RS version. First, get inside the vehicle and start by removing the gear knob; to do this, pull it upwards with force, possibly using a heat gun (to warm it up and facilitate the removal of the knob). Once removed, detach the gaiter from the sides; then remove the clip that connects the gaiter to the knob shaft to replace it. For reassembly, simply apply the reverse procedure!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Renault Megane
How to Replace the Gear Knob on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the gear knob on a Renault Megane, grip the old knob and rotate it anti-clockwise: this will release it from the end of the lever, allowin…
Replacement of the Gear Knob and Gaiter
Replacement of the Gear Knob and Gaiter
Renault Megane (2008-2015 / Megane III, Megane 3) Grip the gear knob and pull it upwards with force to remove it (be careful of the spring). Detach the gaiter frame and pull it out of its housing by …
How to Remove the Gear Knob from the Renault Megane
How to Remove the Gear Knob from the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) The gear knob is one of the components most subject to wear inside the cabin, and after many miles, it may need replacing. Below, you will find out h…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos