Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Gearbox Oil

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Transmission fluid

Lift the vehicle on appropriate axle stands, locate the gearbox oil drain plug and unscrew it after positioning a container to collect the used oil underneath. Clean the plug of any metal dust residues, apply a new gasket, and tighten it. Then proceed to refill with new oil, which is recommended to be done from the engine bay using a tube attached to a funnel to insert it into the gearbox fill hole: the oil is at the correct level when it begins to overflow from the fill hole. Finally, apply and tighten the plug. You will immediately notice reduced noise and smoother gear engagement.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Oil in the Renault Clio II
How to Replace the Gear Oil in the Renault Clio II
Renault Clio (1998-2005 / Clio 2, MK 2) Today, you will learn how to replace the gear oil in the Renault Clio II using Kennol oil. To carry out the replacement, you must: turn off the vehic…
How to Replace the Gear Oil on a Renault Clio 3?
How to Replace the Gear Oil on a Renault Clio 3?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the gear oil on a Renault Clio, lift the car using a ramp or jack to remove the plastic cover of the lower components by loosening the app…
How to Change the Gearbox Oil on a Renault Clio
How to Change the Gearbox Oil on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To change the gearbox oil on a Renault Clio, raise the car to gain easier access to the components underneath the engine compartment. Locate the gear…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos