Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Service Light on Renault Clio 3

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Service warning light

In this video tutorial, learn how to reset the service light for routine maintenance oil change on a third series Renault Clio. First, get inside the car and turn on the ignition by turning the key: using the windscreen wiper control, scroll through the menu until you reach the service option; then enter and hold the button until the kilometres start flashing, and keep holding until they stop flashing. At this point, turn off the ignition and turn it back on, checking that the light has been reset!

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Clio 5
How to reset the service light on the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) The procedure for resetting the service light, related to the car service, on a Renault Clio model 5, follows very simple and quick steps. First, we …
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos