Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light of a Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Tail light

Before you start, open the boot lid. This will expose the screws that secure the light unit. Begin by unscrewing the Torx screws and then remove them. Once removed, proceed to disengage the light from its housing. After removing the light, to take it out completely, disconnect the bulb holder by releasing the clips that secure it. This will successfully remove the rear light. To fit the new light, simply follow these instructions in reverse, and you will have successfully completed the replacement.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Renault Scenic
How to Remove the Rear Light on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) To replace the rear light on a Renault Scenic, open the tailgate to access the screws located between the seal and the light. Once these bolts are lo…
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today's instructions will allow us to remove and replace the bulbs of the rear headlamp on the Renault Scenic. First, open the rear tailgate of the b…
How to replace the rear headlight on the Renault Scenic 3
How to replace the rear headlight on the Renault Scenic 3
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) With the help of the following video tutorial, we will show you the steps to replace the rear headlight of the Renault Scenic model mk3 on your own. …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos