Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Base and Antenna Cable on Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Antenna

See other generations:
Video tutorial

Open the boot lid and detach the two plastic cover supports using a small flat screwdriver or a plastic wedge (to avoid scratching). Unscrew the two T20 Torx screws located on the right side of the boot (looking towards the interior of the cabin) and detach the plastic secured by them.

Repeat the operation on the left side. To create more space, remove the circular seal that holds the boot lid closed and fold the rear seat backs forward.

Unscrew the third seatbelt fixed to the roof and detach the roof panel just enough to access the antenna cable and its support, which you can now unscrew and remove.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Replacing the Radio on Renault Megane Scenic
Replacing the Radio on Renault Megane Scenic
Renault Scenic (1996-2003 / ) Do you want to replace the old radio? Here’s how to remove the radio from the dashboard of the Renault Megane Scenic. Use the original or aftermarket…
Replacing the Radio in a Renault Scenic
Replacing the Radio in a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Want to remove the radio from your Renault Scenic? Let's look at how to disassemble the pieces to access and remove the radio. Obtain removal keys to…
Removing Car Radio from Renault Scenic
Removing Car Radio from Renault Scenic
Renault Scenic (1996-2003 / ) Let’s look at the removal and installation of the radio in a Renault Scenic. Use the original metal keys that came with the radio. Insert the keys in…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos