Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dacia duster change disc brakes

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Brake rotors

How to change the disc brakes of our car? Let's see how to disassemble the disc and the pads. We lift the car on a column bridge up to the desired height, immediately after we go to remove the rim (with a telescopic wrench or an air drill) with the respective pins. We unscrew the locking pin of the brake caliper, remove the same from the caliper support. We remove the caliper support from the wheel hub with a socket wrench. We unscrew the screws with a screwdriver and remove the disc from the wheel hub. Let's get ready to mount the new disc with its attached caliper. We mount the wheel and test the functioning of the disc.

Posted on 18 December 2020 by ScegliAuto

Video tutorial

Related tutorials

Replacing the rear disc on Renault Megane
Replacing the rear disc on Renault Megane
Renault Megane (2002-2010 / Megane 2) Does the rear brake disc of a Renault Megane need to be replaced? Let's see how the brake disc is removed. We lift the car with a column bridge, imme…
Front Disc and Pad Replacement
Front Disc and Pad Replacement
Renault Megane (2002-2010 / Megane 2) Lift the vehicle on a hydraulic lift and remove the front wheel; lever between the disc and the caliper to retract the caliper piston, remove the pro…
How to remove the front brake disc of a Renault Megane
How to remove the front brake disc of a Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) Before starting, we will have to raise the front end of our Renault Megane. So let's start by disassembling the front wheel, unscrewing the relative …

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos