Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Disc and Pad Replacement

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake rotors

See other generations:
Video tutorial

Lift the vehicle on a hydraulic lift and remove the front wheel; lever between the disc and the caliper to retract the caliper piston, remove the protective caps from the caliper mounting pins and unscrew them to detach the caliper; extract the old pads and remove the caliper bracket; then unscrew the brake disc mounting pins from the hub and remove the disc.

Before fitting the new disc, clean the hub seat with a wire brush and apply grease; then proceed in reverse order by installing the new disc, the caliper bracket, inserting the new pads, and finally the caliper itself, applying the anti-vibration spring.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Replacing Rear Brake Pads on a Renault Megane
Replacing Rear Brake Pads on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Let's look at replacing the rear brake pads on a Megane. Lift the car on a column lift using the appropriate pins. Unscrew the locking pin of the bra…
How to Activate the Rear Brake Pad Replacement Procedure on a Renault Megane IV
How to Activate the Rear Brake Pad Replacement Procedure on a Renault Megane IV
Renault Megane (2015-2023 / Megane IV, Megane 4) Let’s see how to activate the rear brake pad replacement procedure on the Renault Megane IV: turn on the ignition, press the brake pedal, and deactiv…
Replacing Front Discs and Pads
Replacing Front Discs and Pads
Renault Megane (2002-2010 / Megane 2) Once the vehicle is lifted and the front wheel is removed, disconnect the retaining spring applied to the caliper; lever between the disc and the cal…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos