Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : Replacing rear brake pads on Renault Megane

Renault Megane - Video tutorial

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Brake pads
Operation: Replacing rear brake pads on Renault Megane

Let's see the replacement of the rear brake pads of a Megane. We lift the car on a column bridge with the respective pins. We unscrew the locking pin of the brake caliper, remove the same from the wheel support. Remove the pads from the wheel hub caliper with a screwdriver: compress the caliper compression piston or free it from oil. We mount the new pads on the brake caliper. We mount the brake caliper with the holder on the brake disc, tighten all the pins and mount the wheel. Let's get ready to perform the same operations on the other calipers on the car. We test the functioning of the brake in all its parts.


Posted on 27 December 2023 by ScegliAuto



How to replace the rear brake pads in Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial we can see how to replace the rear brake pads in Renault Megane 3, a very simple operation. First of all, open the bonnet and remove
How to replace the rear brake pads on the Renault Megane?
Renault Megane (2002-2010 / Megane 2) In order to replace the rear brake pads of the Renault Megane you have to unscrew the bolts that secure the wheel to the relative hub, so that you ca
How to replace the brake pads on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) We start the replacement of the brake pads of the Renault Megane 3 by opening the front hood and immediately after the brake fluid cap. We then proce

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos