Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Brake pads

See other generations:
Video tutorial

Start the replacement of the brake pads on the Renault Megane 3 by opening the front bonnet and then the brake fluid cap. Next, remove the rear wheel and lift the vehicle with a jack and axle stands to gain access to the pads. Continue the replacement by loosening the brake caliper with a 13mm socket and removing the caliper bolts with a 15mm spanner; use a screwdriver to lever the caliper and then remove the pads.

Clean the end of the support with a wire brush. Lubricate the new pads with grease and push the piston in to fit the new pads.

Insert them into the caliper, refit the caliper, and tighten the caliper bolts. Refit the wheel and lower the vehicle.

Pour in new brake fluid and close the bonnet.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads in the Renault Megane?
How to Replace the Rear Brake Pads in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to replace the rear brake pads in the Renault Megane 3, a very straightforward operation. First, open the bonnet a…
How to Replace the Rear Brake Pads on a Renault Megane?
How to Replace the Rear Brake Pads on a Renault Megane?
Renault Megane (2002-2010 / Megane 2) To replace the rear brake pads on a Renault Megane, first unscrew the bolts that secure the wheel to the hub, allowing access to the disc and brake a…
How to Change the Front Brake Pads on a Renault Megane
How to Change the Front Brake Pads on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) On the Renault Megane, the procedure begins with securing the car: work on the front wheel, which is removed to access the brake assembly. With the c…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos