Do it yourself
| ||||
|
Renault Megane - Video tutorial
Model: Renault Megane
Megane 3, Megane III
- Years 2008-2015 In this tutorial we can see how to replace the rear brake pads in Renault Megane 3, a very simple operation. First of all, open the bonnet and remove the brake fluid reservoir cap, then lift the side where we are going to work and disassemble the wheel. Then unscrew the two caliper bolts with a 13mm and another 15mm wrench, remove the old pads and clean any dirt on the brake. We then compress the piston with the help of a vice, insert the spare pads and recompose everything following the reverse procedure.
Posted on 17 April 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |