Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Service warning light

In this tutorial, we will see the instructions that will allow you to reset the service light for the regular maintenance oil change on a first-generation Renault Captur. First, get inside the car and turn on the ignition by pressing the button; then, using the buttons on the right lever, scroll through the menu until you reach the service interval option. At this point, hold down the button until the messages start to flash; you will see the new mileage that needs to be covered. Finally, turn off the ignition and start the engine!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Captur
How to reset the service light on the Renault Captur
Renault Captur (2013-2019 / MK 1) Today we will explain how to reset the service light of the Renault Captur. First, we need to turn on the instrument panel and then press the Set but…
How to reset the service light on the Renault Captur 2
How to reset the service light on the Renault Captur 2
Renault Captur (2019-2026 / MK 2) The reset of the service light of the 2021 Renault Captur model 2 is a very simple operation that can be done independently, also thanks to our short…
How to reset the service light on the Renault Captur
How to reset the service light on the Renault Captur
Renault Captur (2013-2019 / MK 1) After performing the routine maintenance required by the Renault Captur, it is necessary to reset the service light or maintenance light. To reset th…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos