Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Bulb Replacement on Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Tail light bulb

Work with the car turned off, the key removed, and the handbrake engaged. Open the boot lid and remove the cover from the inner lining of the boot, on the side of the affected light cluster. Use a socket wrench to unscrew the two now-exposed screws that secure the light from the rear. Pull the light cluster from its housing and disconnect the connector by pressing the release tab. At this point, simply press the two plastic levers to remove the housing where all the bulbs are fixed. You can then replace any blown bulb.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the tail lights on a Renault Megane?
How to remove the tail lights on a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, we will see how to disassemble the rear lights on a Renault Megane, a very simple and quick operation. First, let's make sure that …
How to Remove the Rear Lights from the Tailgate on the Renault Megane?
How to Remove the Rear Lights from the Tailgate on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to remove the rear lights from the tailgate on the Renault Megane, a very simple operation, allowing you to replac…
How to Replace the Rear Light Bulbs in a Renault Megane?
How to Replace the Rear Light Bulbs in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to replace the rear light bulbs in a Renault Megane, an extremely simple and quick operation. First, ensure that t…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos