Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reverse Light Bulb Replacement

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Headlight bulb

To replace the reverse light bulb, it is necessary to disassemble the entire lighting assembly. The screws are accessible on the side of the pillar. After removing the screws with a screwdriver, remove the lamp by disconnecting the connector. Once the lamp is removed, take out the two screws to access the bulb holders. After removing the cover, carefully replace the faulty bulb by pressing it slightly and turning it counterclockwise until it releases. Insert the new bulb, ensuring it has the same specifications. Refit the screws of the bulb holders and reposition the lamp assembly in its housing, reconnecting the respective connector. Tighten the screws carefully.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Renault Clio
How to Replace the Front Headlight Bulb on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before you can start, open the front bonnet of your Renault Clio. Begin by unclipping and removing the rear cover of the blown bulb. Next, disconnect…
How to Replace the Bulb of the Rear Light on a Renault Clio
How to Replace the Bulb of the Rear Light on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the bulb of the rear light on a Renault Clio, open the tailgate to access the knob inside the boot, located near the light containing the …
How to Replace the Front Headlight Bulb on a Renault Clio 4?
How to Replace the Front Headlight Bulb on a Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the front headlight bulb on a Renault Clio 4, open the bonnet to access the rear of the headlight corresponding to the bulb to be replaced…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos