Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Front Wipers on Renault Megane 2

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Windshield wipers

Lift the wiper off the windscreen of the car. To remove the blade, simply press the tab of the blade that is locked into the arm, as shown in the video. While doing this, pull the blade off. Similarly, to fit the new blade, insert it into the arm and then lock the tab until you hear the classic 'click'. Obviously, the procedure is the same for both front wipers. If during the work you need to rest the arm without the blade on the windscreen, remember to place something underneath (like a cloth) to avoid scratching the glass.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wipers on the Renault Megane
How to Replace the Wipers on the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Replacing your car's wipers in a timely manner not only ensures greater safety while driving (especially in rain and/or poor visibility) but also pre…
Removing Wiper Blades on Megane
Removing Wiper Blades on Megane
Renault Megane (2002-2010 / Megane 2) How to remove the wiper blades on a Renault Megane? Follow these steps. Take the wiper arm, gently pull the movable blade (without breaking it) and s…
How to Replace the Rear Wiper Blade on a Renault Megane
How to Replace the Rear Wiper Blade on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Before you start, exit the cabin of your Renault Megane and head to the rear hatch. Begin by lifting the entire wiper arm, which will also raise the …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos