Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Disassembly of the thermostat on Renault Clio

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Thermostat
Operation: Disassembly of the thermostat on Renault Clio

The thermostat of the Renault Clio no longer works? Let's see how the thermostat is removed from inside the engine compartment. We lift the front hood of the car, locate the plastic engine protection cover and remove it. Unscrew the screws placed on the cap of the thermostat sleeve (we use a socket wrench with relative bushes), remove the sealing cap and extract the whole piece of the refrigerant thermostat from its seat. Once the piece has been removed, replace it with a new one, close the special compartment with the cap, tighten the locking pins well with all its parts. Make sure you have inserted and mounted the thermostat correctly. We assemble the various plastics at the end of the assembly.


Posted on 21 January 2024 by ScegliAuto



How to remove the gear knob of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before starting, we will have to sit in the driver's seat of our Renault Clio. Let's start then by going to disengage and lift the lower section of t
How to remove the thermostatic valve of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Do you want to remove the thermostatic valve of your Renault Clio and do not know how to do it? Let's see how to disassemble the thermostatic valve m
How to replace the key battery of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Let's start by removing the rear side of the electric key of our Renault Clio. Subsequently, using a flat screwdriver and levering, we will have to g

Other guides that may interest you

    Frequently Asked Questions

    • Clio 1998-2005 - Where is the thermostatic valve of the Renault Clio II? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos