Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Renault Scenic

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Rear bumper

Before you begin, open the rear hatch of your Renault Scenic. Start by unscrewing and removing the screws that secure the rear lights, then pull them out and disconnect the electrical connectors. Next, unclip and remove the clips securing the rear bumper, then unscrew and remove all the fixing bolts located around the perimeter of the bumper. This will free the bumper. At this point, unclip and remove the bumper from its housing, and you will have successfully completed the removal.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the rear bumper of the Renault Scenic 4?
How do you remove the rear bumper of the Renault Scenic 4?
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) For the disassembly of the rear bumper of the Renault Scenic 4, this video guide will help us by providing step-by-step instructions on the specified…
Replace the Front Bumper of a Renault Scenic
Replace the Front Bumper of a Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) How to remove the front bumper of your Scenic? Lift the boot of the Clio to access the screws securing the headlights and the bumper. Unscrew the sec…
Removing the Rear Bumper on a Scenic
Removing the Rear Bumper on a Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) How do you remove the bumper from a Scenic? Let's look at removing the bumper from above the rear of the car. Lift the tailgate to access the fasteni…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos